Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPTEMBER, 2014
INSTALLATION INSTRUCTION
Current Limiter - Recessed Flanged W Track
WEDL-RT, WHEDL-RT, WEDR-RT, WHEDR-RT
INSTALLING POWER LIMITER TO CONDUIT OR GRID RUNNER CEILIN.
• Remove Cover and Box.
• Remove appropriate knockout in Box, and feed 3/8” or 1/2” Conduit and Supply leads into Box. Fasten Conduit to Box.
• Attach wires per electrical connection instructions.
• Attach Track to Current Limiter. Be sure to check for proper polarity between track and switch.
Also ensure all 5 contact plates are properly inserted into each individual track circuit.
• Replace Box and Cover.
• Secure the track to the ceiling.
Conduit Connector
(3/8” or 3/4”)
Conduit
Electrical Wire (5-12AWG)
Knock Out
Box
Box
Screw
Cover
Screw
Circuit Breaker
Locking Nut