Specifications

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEP 2014
PRODUCT DESCRIPTION
Designed for nearly every application and interior environment, our extensive 120V Track
collection oers hundres of luminaires that integrate cutting edge design and aerospace
detailing with designer glass and metal nishes. Versatile yet sturdy, the track systems
can be surface mounted or suspended from the ceiling, liberating luminaires from the
constraints of rigid mountings and enabling the lighting design to adapt to changing
styles and spaces. 120V 3-wire, wide style track. Saves on installation costs by eliminating
the need for long separate feed runs.
FEATURES
• Each Circuit is rated at 20A and allows the control of two individual sets of xtures
• Enables the use of two separately switched circuits on one section or run of track
• Compatible with all JHT and JTK series track luminaires
• Saves on installation costs by eliminating the need for long separate feed runs
SPECIFICATIONS
Materials: Aluminum extrusion with copper bus wire.
Electrical: 20 Amps rated, 120V. It is common practice to use
tracks at 80% capacity to insure compatibility with dimmers and
connectors (1920W maximum).
Mounting: Can be installed on drywall, or suspended ceilings.
Standards: UL & CUL listed
– –
Example: J2T8WT
ORDER NUMBER
Model Length Finish
J2 J2 Track
T4
T8
T12
4'
8'
12'
BK
WT
Black
White
Each section includes two matching end caps.
J2 TRACK
120V Double Circuit Track System
Selecting Connectors (example using J2 Track)
= Electrical Continuity
Polarity is just a matter of matching ends
The 2 wire side of a "J2" Track has an indicator groove running its length
• Using a left connector, the track would run
with the groove along the outside
• Using a right connector, the track would run with the
groove along the inside
L
L
R
L
L
L
L
Left Connector (J2–LLEFT)
• Groove on the Outside Edge
• Contacts on the Outer Angle
R
R
R
R
• Groove on the Inside Edge
• Contacts on the Inner Angle
Right Connector (J2–LRIGHT)
• In order to select the appropriate connectors to maintain electrical continuity, start at your power source and walk the length of the track. If you turn left, use a left connector. If you turn right, use a right connector.
1m"
1"
1"
w"
Circuit 1
Circuit 2
Neutral
Sample Layout
A SK18 18" Track suspension rod
B J2LE Live end connector
C J2T4 4 foot Section of J2 Track
D J2LLEFT "J2" Connector (Left)
E JLED17S27 LEDme™ LED track head
F JENDCAP End Cap (included with track section)
A
B
C
C
E
F
D
P1
P2
J CLIP
Model Description
2-Circuit Track
Conversion Clip
JCLIP
Each 4' section includes 3
Each 8' section includes 6
Each 12' section includes 9
Locks connectors on luminaire into 2-circuit mode