Installation & Assembly

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
INSTALLATION INSTRUCTION
400 Series LED Quick Connect™ Socket Set
QP-LED403, MP-LED403
OVERVIEW:
Pendant sockets sets are designed for use with all WAC quick connect adapters. They may also be used on other manufacturers
brand of quick connect (consult factory for compatibility). Pendants may be mounted to mono rail, monopoints,
or line volt track, by coupling to a low voltage quick connect adapter.
QP-LED403 includes 6 feet of cable. QP- LED403X12 includes 12 feet of cable.
Pendant socket sets can be eld cut to desired length.
INSTALLING SHADE:
1. Socket Set QP-LED403 is designed to be used with WAC’s
G491, G492 and G493 glass shades.
2. Insert glass into tter. Align the 3 holes in the glass shade
with the holes in the tter.
3. Carefully turn the screws through the holes in the tter
into the holes in the glass shade to secure glass.
INSTALLING QUICK CONNECT:
1. Insert the post of the quick connect into the quick
connect adapter.
2. Thread the top half of the conical section until it seats
with the adapter.
3. Adjust xture position, use caution not to loosen
the conical section