Specifications

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUL 2014
TAPE LIGHT ACCESSORIES Model # Dimensions Description
Joiner Cable
LEDTO24IC6
LEDTO24IC12
LEDTO24IC72
LEDTO24IC120
6"
12"
72"
120"
Connects two sections of InvisiLED® Classic Outdoor.
4-Way "X"
Connector
LEDTO24X wires: 5" each
connectors: w" each
"X" connector has one male and three female connectors
and can be used to easily customize your design layout.
3-Way "Y"
Connector
LEDTO24Y wires: 5" each
connectors: w" each
"Y" connector has one male and two female connectors
and can be used to easily customize your design layout.
End cap
LEDTO24EC
s" × s" × a"
Use to terminate every run to protect against contaminants.
Seal cut end with silicone after adding end cap.
Mounting Clip 1
(10 pack)
LEDTO24C1
18" × a" × 4"
For installation on non-at surfaces where there is no edge
contact. 2 clips per ft are recommended for straight runs.
Mounting Clip 2
(10 pack)
LEDTO24C2
d" × a" × 4"
For installation on non-at surfaces, allows for contact on
one edge. 2 clips per ft are recommended for straight runs.
Mounting Clip 3
(10 pack)
LEDTO24C3
s" × s" × 4"
For installation on non-at surfaces, allows for contact on
both edges. 2 clips per ft are recommended for straight runs.
Clear Channel
LEDTO24CH1
LEDTO24CH5
12" × s" × 4"
60" × s" × 4"
Rigid, non-exible channel for mounting
to a straight, solid surface.
InvisiLED® Pro Outdoor
Power Supplies and Accessories
POWER SUPPLY Model # Input Output Dimensions Description
Remote Class 2
DC Transformer
ENO24100RB2T 120V-277V AC 24V DC/96W
11v” × 48” × 1,”
6’ lead wire included.
Requires a minimum load of 1W.
Max run 100W: 28'