Specifications

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE 2012
ORDER NUMBER
HR-3LED-R18D-A
COMPATIBLE TRIMS
Model # Description Beam Color Temp Finish
HR-3LD-ET118 Round, Open Reector Downlight
Energy Star
40° (F)
2700K (27), 3000K (W)
3500K (35), 4000K (C)
Brushed Nickel (BN)
Copper Bronze (CB)
White (WT)
HR-3LED-T218 Round, Shower Light 28° (N)
HR-3LED-T718 Square, Open Reector Downlight 15° (S), 28° (N), 50° (F)
HR-3LED-T118 Round, Open Reector Downlight 15° (S), 28° (N), 50° (F)
2700K (27), 3000K (W)
3500K (35), 4000K (C)
Haze/White (HZ/WT)
Haze/Brushed Nickel (HZ/BN)
Haze/Coper Bronze (HZ/CB)
Specular Black/White (SB/WT)
Specular Black/Brushed Nickel (SB/BN)
Specular Black/Copper Bronze (SB/CB)
Brushed Nickel (BN), Copper Bronze (CB), White (WT)
Example: HR-3LED-T118F-W-HZ/WT See individual trim spec sheets for complete information.
HR3LEDR18DA
3.5" Tesla™ Remodel Housing
120V – Non-IC – Airtight
6s"
4a"
13w"
PRODUCT DESCRIPTION
Non-IC, airtight remodel housing.
For use with HR-3LED series trims.
FEATURES
• Cutout: 4s”
• 120VAC 50/60Hz input
• Non-IC
• Airtight
• May be dimmed to 1%
with
electronic low voltage (ELV) dimmer
• Provided with push-in wire connector for easy installation
• Accommodates ceiling thickness from 2”-1"
• UL and CUL Listed
• 5 year WAC Lighting product warranty
SPECIFICATIONS
Construction: Housing and junction box are 20 gauge steel.
J-Box: Three knockouts and three Romex® style wiring connectors provided
for ease of installation. Rated for branch wiring.
Driver: Electronic driver, 120VAC 50/60Hz input, 21.5W output.
Power factor >0.9. Dimming with thermal protection.
Mounting: Two heavy gauge inner retention clips push out onto ceiling
or other mounting surface to rmly hold housing in place.
Accommodates surface up to 1" thick. 4s" cutout hole.
Dimming:
May be dimmed to 1% with electronic low voltage (ELV) dimmer.
Approved dimmers: Lutron Skylark SELV-300P-WH and Leviton Vizia VPE04.
Rating: Non-IC: insulation must be kept at least 3" away from the housing.
Standards: UL & CUL Listed.