Specifications

SPECIFICATION SHEET
SINGLE CIRCUIT “H” TRACK ACCESSORIES
3 Wire Flexible Connector
Model HFLX
Description: Connects two “HT” tracks at variable angles, from 60˚
to 180˚. Used to make the transition from wall to ceiling, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 9 3/4"
3 Wire “L” Connector
Model HL
Description: Connects two “HT” tracks at a 90˚ angle, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 4 1/4" x 4 1/4"
3 Wire “T” Connector
Model HT
Description: Connects three “HT” tracks at 90˚ angles, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 7 1/4" x 4 1/4"
3 Wire “X” Connector
Model HX
Description: Connects four “HT” tracks at 90˚ angles, and is a
power entry point. Accepts wires from above the ceiling, with knock
out for trade size connector.
Finish: Available in White or Black.
Listing: UL & CUL Listed, New York City Approved.
Dimensions: 7 1/8” x 7 1/8”
W.A.C. reserves the right to change details that do not affect overall function and performance.
9 3/4"
2 3/4"
2 3/4"
2 3/4"
4 1/4"
4 1/4"
4 1/4"
REV 07/29/04