Installation & Assembly

5WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. OCTOBER, 2016
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Adjustable Spot - Endurance Sign Lighting
WP-LED514, WP-LED529
COMPLETING THE INSTALLATION:
To prevent moisture from entering the outlet box and causing a short, use caulking (i.e. silicone sealant) to outline the outside of Round Canopy
where it meets the wall while leaving the bottom side unsealed to allow moisture to escape.
Note: This xture is suitable for wet location installations in all mounting orientations.
SAFETY CABLE SET INSTALLATION DETAIL
1. Mount Safety Cable Canopy above xture location (Do not exceed 45°
from horizontal) using appropriate mounting hardware for surface.
(By Others)
2. Unthread the Cable Stopper by rotating it clockwise.
3. Pull the aircraft cable while pressing the Cable Stopper.
4. Thread and tighten the Cable Stopper after required tension on the
aircraft cable is reached.
5. Cut excessive aircraft cable with appropriate tool.
Safety Cable Canopy
Aircraft Cable
Cable Stopper
Pull Aircraft Cable
Do Not Exceed 45°