Installation & Assembly

2WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. OCTOBER, 2016
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
STEP 1:
• Install Fixture Head (WP-LED514/WP-LED529) to Stem using
I-Connector.
a. Installation without Safety Cable Set
1. Thread the I-Connector into the Stem until it stops.
2. Insert the I-Connector with Stem into xture head until
it stops and lock it with the Hex Key.
b. Installation with Safety Cable Set (Stem greater than 36")
1. Thread the I-Connector into the Stem until it stops.
2. Insert the Safety Cable Ring Bracket into the I-Connector
3. Insert the I-Connector assembly into Fixture Head
Assembly until it stops and lock it with the Hex Key.
NOTE: See Safety Cable Installation Section for more detail
on the Safety Cable Set.
INSTALLATION ASSEMBLY OVERVIEW
Two Fixture Heads with T Connector
(WP-LED529)
Locking Screw
One Fixture Head with L Connector
(WP-LED514)
Safety Cable Locking Mechanism Unit
(Comes with Safety Cable Canopy)
I Connector
24" Stem
12" Stem
6" Stem
Stem Connector
Round Canopy
Cable Plug
Cable Plug Bracket
Canopy Gasket
4" Junction Box
(By Others)
Canopy Mounting Screw
Safety Cable Canopy
(Optional, for stem greater than 36")
INSTALLATION INSTRUCTION
Adjustable Spot - Endurance Sign Lighting
WP-LED514, WP-LED529
Hex Key
Hex Key
Safety Cable Ring Bracket
Stem
Stem
I-Connector
I-Connector
Locking Screw
Locking Screw
Fixture Head Assembly
Fixture Head Assembly