Installation Sheet

waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPT. 2020 4.
INSTALLATION INSTRUCTION
InvisiLED
®
CCT 100/200/300/400/600
T24-CS
6. Joining between tapes:
Joining tape together (If necessary), the following accessories can be used to join between tapes section
depending on your application:
Tape to Tape Connector (T24-MM-WT)
Another way to join between tape is to use soldering method. Before soldering, making sure to scrap off the
polyurethane coating on the surface of the copper pad using a sharp cutter or knife blade.
Tape to Tape T Connector (T24-TI-WT) Tape to Tape X Connector (T24-XI-WT)
1
Tape to Tape L Connector (T24-LI-WT) Flex Tape to Tape Y Connector
(T24-Y-WT, T24-Y-BK)