Installation Sheet

waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. SEPT. 2020 2.
INSTALLATION INSTRUCTION
InvisiLED
®
CCT 100/200/300/400/600
T24-CS
WIRING AND INSTALLATION:
1. Turn Power off at circuit breaker
2. Mounting Enclosed 24VDC CCT class 2 output remote power supply at desired location. Measured a distance
between power supply to the beginning of the tape run and make sure that it is under 100ft.The allowed
maximum distance of wires between the output of power supply to the beginning of tape is 100 ft. The
minimum output gauge wire of power supply is 20 AWG.
To extend the cable length (if needed), In Wall Rated Joiner Cable (T24-IC) and Joiner Cable Extender (T24-
FF-WT) can be used to join between sections as shown below:
T24-FF-WT
T24-IC
100 ft. Max