Installation Sheet

waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. June 2020 2.
INSTALLATION INSTRUCTION
BASICS 100/200
T24-BS
WIRING AND INSTALLATION:
1. Turn Power off at circuit breaker
2. Mounting Enclosed 24VDC class 2 output remote power supply at desired location. Measured a distance between
power supply to the beginning of the tape run and make sure that it is under 40ft.The allowed maximum distance of
wires between the output of power supply to the beginning of tape is 40 ft. The minimum output gauge wire of
power supply is 20 AWG.
2.1) Power Supply: PS-24DC-U60R-SP, PS-24DC-U96R-SP, PS-24DC-U288R-SP
This power supply provides a 6 inches output leads wires. To extend the cable length between hard wire power
supply or a wiring box to a tape sections, 24VDC Basics Extension Cable (T24-BS-EX2) is needed. The extension
cable package also provides small screw driver to unscrew the connector.
Wire Color
Power Supply Output
T24-BS-EX2 Cable
Tape marking
RED
RED
+24VDC
BLACK
BLACK
-
24VDC Basics Extension Cable (T24-BS-EX2) and Low Voltage Wiring Box (LED-T-B) can be used to join between
wires.
40 ft. Max
LED-T-B
T24-BS-EX2
T24-BS-EX2
PS-24DC-U96R-SP