Installation Sheet

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2017 2
ACCESSORIES:
With the power o, follow steps below. Reference specication sheet for compatible accessories.
Glare Control Accessory Installation:
Lens Accessory Installation:
Lens Accessory Installation:
Step 1: Gently move front cap forward
to remove it. One torsion spring will
remain engaged while other will slide
out completely. (See Fig 2)
Step 1: Gently move front cap forward
to remove it. (See Fig 5)
Step 4: Align the triangle mark on
the lens holder to the one on the
reector holder ,then rotate clockwise
to lock it. (See Fig 8)
Step 5: Reinstall front cap back in place.
Ensure torsion spring securely goes back into
spring slot on xture. (See Fig 9)
Step 2: Insert glare control accessory
through the front frame. (See Fig 3)
Step 2: Rotate lens holder with ears
anticlockwise to remove it. (See Fig 6)
Step 3: Reinstall front cap back in place.
Ensure torsion spring securely goes
back into spring slot on xture.
(See Fig 4)
Step 3: Replace existing lens
With new lens. (See Fig 7)
Base Plate
Mounting Screw
Glare control
accessory.
Snoot shown
Torsion Spring
Lens Holder
Mark on
reector holder
Mark on LENS holder
Ear on Lens Holder
Fig 2
Fig 5
Fig 8
Fig 3
Fig 6
Fig 9
Fig 4
Fig 7
INSTALLATION INSTRUCTION
Lucio LED Monopoint
MO-6010/MO-6022