Installation Guide

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2016
ACCESSORIES : Fig.6
1. Use a screw-driver or nger nail to gently remove the front cap of the xture. Fig.5
2. Install the accessory into the front cap. Note: accepts one lens or one glare control accessory. Fig.6
3. Reinstall the front cap onto the xture. Note: front cap will protrude o front of xture the thickness of the accessory base. Fig.7
Cross Louver
LENS-11P-CRL
Front Cap
Cross Louver
Fixture Body
Protrusion Front Cap
Snoot
LENS-11-SNOOT
Lens Accessory
LENS-11
Front Cap
Fig.5
Fig.6
Fig.7
INSTALLATION INSTRUCTION
Silo X10 - LED Monopoint
MO-2010