Installation Guide

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUNE, 2016
REPLACING TIR LENS :
1. Use a screw-driver or nger nail on inside lips to gently pull out the front cap of the xture. Fig.2
2. Use a at-tip screw-driver and gently pry in lens holder removal slot to remove lens holder. Fig.3
3. Replace the Lens with the desired one.
4. Align plastic tabs and reinstall lens holder on securely. Ensure silicone guide is in place. Fig.4
5. Reinstall front cap
Flood Lens
TIR-LUM6-F
Narrow Flood Lens
TIR-LUM6-N
Pad painted edge to
protect from damage
Silicone Guide Ring
Front Cap Lens Holder TIR Lens Fixture Body
Lens holder
removal slot
Lens holder
Front Cap
Fig.2
Fig.3
Fig.4
Front Cap
INSTALLATION INSTRUCTION
Silo X10 - LED Monopoint
MO-2010