Installation Guide

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2016 2
ACCESSORIES: Fig. 2
1. Use a screw-driver to loosen the two screw at the back of the xture body.
2. Take out the front frame, then change the lens.
3. To install cross louver or snoot, use the clips around the front frame to fasten them directly.
INSTALLATION INSTRUCTION
Exterminator II - LED Monopoint
MO-1014
FIG.2
Screw
LENS-11
Front Frame
LENS-11P-CRL
LENS-11-SNOOT