Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. APR 2014
InvisiLED® Outdoor Palette
LED Tape Light Power Supplies & Controllers
POWER SUPPLY Model # Input Output Dimensions Description
Remote Class 2
DC Transformer
EN-O24100-RB2-T 120V-277V AC 24V DC/96W
11v” × 48” × 1,”
6’ lead wire included.
Requires a minimum load of 1W.
Max run 100W: 40'
CONTROLLERS Model # Dimensions Description
Wireless Palette
Controller
LED-TO24-WS
4” × 22” × s”
Wireless connection to Master Controller.
• Use to switch from color changing to white light
• Play/Pause the color changing eect
• Control the brightness and speed of the color changing eect
Includes 2 AAA batteries.
Master Controller LED-TO24-CM
4” × 2” × 12”
Powers one run up to 40’. Connects and controls
all slave controllers for runs over 40’.
Slave Controller
LED-TO24-CS
4” × 2” × 12”
Connects to Master Controller for runs over 40’.
Uses a separate 120V power supply. Powers up to another 40’,
a new Slave Controller is needed for every 40’ extension.
CONTROLLER COMPONENTS Model # Dimensions Description
Joiner Cable LED-TO24-IC6
LED-TO24-IC12
LED-TO24-IC72
LED-TO24-IC120
6"
12"
72"
120"
Extends distance between Power Supply and Master
Controller.
Signal wire LED-TO24-SW60
LED-TO24-SW120
60”
120”
Connects Master Controller and Slave Controller.
DMX Signal Wire
LED-TO24-MW60
LED-TO24-MW120
60”
120”
Connects DMX system to Master Controller.