Installation Sheet

2WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. NOVEMBER, 2015
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
WIRING AND INSTALLATION:
1. Determine the number of separately powered runs needed. Each individual run is to be powered by a seperate power supply.
Min. / max. run length 6in/ 20 ft per run (100W transformer)
6in/ 12ft per run (60W transformer)
Current 200 mA/ft
Power consumption 5 Watts/ft
2. Measure the length of each run and round it o to the nearest 6-inch interval. Determine the necessary quantities of
1-ft, 5-ft, 6-in sections, joiner cables, and L, X or Y connectors. Note: Tapelight may be eld cut every 6-inch at the end of run where indicated.
INSTALLATION INSTRUCTION
InvisiLED® 24V PRO 3
LED-TE24
Wire with Remote Transformer
6’ lead wire included
Model: EN-2460-RB2-T
EN-24100-RB2-T
EN-24100-277-RB2-T
Additional power feeds and wiring boxes may
be used to transition in walls.
Wire with Plug-in Transformer
6’ lead wire included
Model: EN-2460-P-AR-T
EN-24100-P-AR-T
LED-TE24-1
LED-TE24-6IN
LED-TC-Y
LED-TE24-5
LED-TC-EC
(Cut end cap)
LED-TC-EC
(Cut end cap)
LED-TC-EC
(Male end cap)
LED-TC-EC
(Male end cap)
LED-TE24-5
LED-TC-IC
LED-TC-X
LED-TE24-5
LED-TC-L
LED-TE24
Note: Figure not drawn to scale
Fig. 1
OR

