Specifications
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUL 2017
Type
Model Input Output Max Run Dim Compatibility
Remote
Damp Location
ENOD24100RB2T 120VAC 24VAC / 96W 30 feet ELV
Includes a 6 foot lead wire
Minimum load of 1W
Pro Outdoor
Remote
Wet Location
ENO24100RB2T 120 - 277VAC 24VDC / 96W 30 feet No
Class 2 rated
Includes a 6 foot lead wire
Minimum load of 1W
Pro Outdoor,
Palette Outdoor
INVISILED® ACCESSORIES
Outdoor electronic accessories
End cap LEDTO24EC
Use to terminate every run to protect against
contaminants.
Seal cut end with silicone after adding end cap.
Pro Outdoor,
Palette Outdoor
3-Way "Y" Connector
LEDTO24Y Connects tape sections Pro Outdoor
4-Way "X" Connector
LEDTO24X Connects tape sections Pro Outdoor
Joiner Cable
LEDTO24IC6
LEDTO24IC12
LEDTO24IC72
LEDTO24IC120
6 in
12 in
72 in
120 in
Extends distance between Power Supply and Master
Controller.
Pro Outdoor
RGB 3-Way "Y" Connector LEDTO24YRGB Connects tape sections Palette Outdoor
RGB 4-Way "X" Connector LEDTO24XRGB Connects tape sections Palette Outdoor
RGB Joiner Cable
LEDTO24IC6RGB
LEDTO24IC12RGB
LEDTO24IC72RGB
LEDTO24IC120RGB
6 in
12 in
72 in
120 in
Use to connect two sections of InvisiLED® Outdoor
Palette tape.
Palette Outdoor
Signal wire
LEDTO24SW60
LEDTO24SW120
5 feet
10 feet
Connects Master Controller and Slave Controller. Palette Outdoor
DMX Signal Wire
LEDTO24MW60
LEDTO24MW120
5 feet
10 feet
Connects DMX system to Master Controller. Palette Outdoor
Master
Controller
LEDTO24CM
4” × 2” × 12”
Powers one run up to 40’.
Connects and controls all slave controllers for runs over 40’
Palette Outdoor
Slave
Controller
LEDTO24CS
4” × 2” × 12”
Connects to Master Controller for runs over 40’
Uses a separate 120V power supply. Powers up to another 40’,
a Slave Controller is needed for every 40’ extension
Palette Outdoor
Wireless
Controller
(optional)
LEDTO24WS
4” × 22” × s”
Wireless connection to Master Controller
Use to switch from color changing to white light
Play/Pause the color changing eect
Control the brightness and speed of the color changing eect
Uses 2 AAA batteries
Palette Outdoor
Touch Panel and
Motion Sensor
CT6AR2
Includes a Touch Panel, an Occupancy Sensor, and a Controller
AC/DC input at 12V(60W Max) or 24V(96W Max)
Connect on secondary side of driver/transformer
Pro, Pro2, Pro3,
LITE, Classic
Daylight to Sunset,
Palette
_______________
Example: LEDTO24WS