Installation Sheet

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2017 7
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Factory
44 Harbor Park Drive
Port Washington, NY 11050
Central Factory
1600 Distribution Ct
Lithia Springs, GA 30122
Western Factory
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Symmetrical Recessed Channel
LED-T-RCH1-WT
6. Mark a 2 3/8” x 3” square on the drywall where the junction box will be located.
Cut out the marked square using a jabsaw or “Rotozip” tool.
Mount the drywall to the studs.
Using the drywall opening as reference, mark 2 3/8” wide lines and cut the desired length of the channel along the drywall.
Mark the location of the Studs for later use.
In any cases where no stud/joist is present, LED-T-CH-PER may be used to secure the channel to the dry wall.
Mount LED-T-CH-PER with two #8 Wood Screws 5” apart centered around the cutout. LED-T-CH-PER should be spaced in 2 feet.
Centerline
Centerline
1/2” Thick Drywall
Section F
2 3/8”
Cutout
Junction Box
Marked square
LED-T-CH-PER
Section F
side view
5”
Drywall (front)
#8 Wood Screws
(Provided)
LED-T-CH-PER (Drywall Back)
(Perforated Metal Sheet)
Drywall Cutout
Mark the Studs
2 3/8”
Cutout
3”
3”
2 3/8”
Cutout