Installation Sheet

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2016 8
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Factory
44 Harbor Park Drive
Port Washington, NY 11050
Central Factory
1600 Distribution Ct
Lithia Springs, GA 30122
Western Factory
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Asymmetrical Recessed Channel
LED-T-RCH2-WT
7. Insert the End Cap & Channel Section from LED-T-RBOX2-WT to the power feed side & insert one End Cap
from LED-T-RBOX2-WT to the opposite side temporarily.
Measure the LENGTH OF CHANNEL in between precisely.
Write the number down on a paper.
Remove the End Caps and Channel Section from the drywall.
Channel Section (from LED-T-RBOX2-WT)
End Cap (from LED-T-RBOX2-WT)
End Cap (from LED-T-RBOX2-WT)
Length of channel
(LED-T-RCH2-WT)
8. If required for installation, cut down LED-T-RCH2-WT to measured/desired length with hacksaw or miter saw that has an appropriate blade
for cutting aluminum. Always wear safety goggles when cutting.
(Note: Channel should be cut together with the diuser to ensure proper tting.)
LED-T-RCH2-WT