Installation Sheet

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2016 11
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Factory
44 Harbor Park Drive
Port Washington, NY 11050
Central Factory
1600 Distribution Ct
Lithia Springs, GA 30122
Western Factory
1750 Archibald Avenue
Ontario, CA 91760
11. Cover up the opening section of the channel with the provided Foam to prevent plaster and dust entering the channel.
Apply ultra-thin drywall tape along edges of the channel to prevent cracking of plaster after installation.
Note: Do not overlap drywall tapes.
Plaster the channel edges to the drywall. Sand and paint the wall properly.
After the plaster cures, remove the Foam and clean the inside of the channel before installing the LED Tape Light Strip.
INSTALLATION INSTRUCTION
Asymmetrical Recessed Channel
LED-T-RCH2-WT
Plaster
Plaster
Foam
Channel
Channel
Foam
Drywall Tape & Plaster
Drywall Tape & Plaster
Stud
Drywall
Drywall