Specification Sheet

Fixture Type:
Catalog Number:
Project:
Location:
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Avenue • Ontario, CA 91760
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JUL 2014
HRLED231R
1" LEDme® Miniature Recessed Spot
2w"
3"
14"
FINISHES
BN GM WT
PRODUCT DESCRIPTION
Round recessed trim with interior open reector for use with a
remote driver. Perfect for use under cabinets or in wall niches.
FEATURES
• 1" aperture
• Cutout: 22”
• Less than z” thick, super low prole trim
• Narrow ood beam spread
• 25° visual cut-o angle
• 350° horizontal rotation
• 100,000 hour rated life
• 5 year WAC Lighting product warranty
SPECIFICATIONS
Construction: Die-cast aluminum trim, aluminum heat sink
and 20 gauge steel housing painted black.
Wiring: Socket and insulated wires are pre-installed within housing, wires
lead out through the side of the housing for connection to remote driver.
Driver: Remote LEDme® electronic low voltage driver required (see below).
Dimming and non-dimming drivers available. Use a multiple terminal block to
wire up to 3 xtures for dimmable drivers (4 for non-dimmable in a neat under
cabinet installation without the use of open splices (see below).
Light Source: Includes one 3W ANSI compliant Warm/Neutral LED
for the nest color consistency possible. Replacement modules available.
Dimming:
May be dimmed to 10% with electronic low voltage (ELV) dimmer.
Mounting: Two heavy gauge inner retention clips push out onto mounting
surface to rmly hold xture in place. Accommodates surface up to w" thick.
22" cutout hole. Approved for use in ceilings with a Class 2 driver.
Finish: Available in White (WT) powder coat paint and electroplated
Brushed Nickel (BN) and Gun Metal (GM).
Rating: Non-IC: insulation must be kept at least 3" away from the housing.
Standards: UL & CUL Listed.
LEDme® REMOTE DRIVERS
Model # Description Type Dimming # Fixture Dimensions
LD-700MA03-EDIM-IS Electronic low voltage Hardwire Yes 1 L: 5s" W: 1s" H: 18"
LD-700MA09-EDIM-IS Electronic low voltage Hardwire Yes 3 L: 78" W: 38" H: 1s"
LED-700MA12-P Electronic low voltage Plug-In No 4 L: 5" W: 38" H: 1s"
See individual driver spec sheets for complete information.
MULTIPLE TERMINAL BLOCK
Model # Dimensions
MTB-01
L: 34" W: 1w" H: d"
12.5A max accommodates up to 6 output
connections for 14 AWG wires.
ORDER NUMBER
Model # Color Temp Finish
HRLED231R 27
W
35
C
2700K
3000K
3500K
4500K
BN
GM
WT
Brushed Nickel
Gun Metal
White
REPLACEMENT MODULES
Model # Color Temp
RM1X327DL
RM1X330DL
RM1X335DL
RM1X345DL
2700K
3000K
3500K
4500K
HR-LED231R – –
Example: HRLED231R-C-GM
FIXTURE PERFORMANCE
Model # Color Temp Watt Lumens CRI
HRLED231R27 2700K 4W* 160 85
HRLED231RW 3000K 4W* 160 85
HRLED231R35 3500K 4W* 170 80
HRLED231RC 4500K 4W* 201 75
*Power consumption may vary depending on the eciency of the system being used.