Installation Sheet

WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. JULY, 2014
FIXTURE INSTALLATION FOR WT/WHT TRACK:
1. Turn the lock switch to the unlock position.
Turn the circuit selecting handle to the power o position. (Figure 1)
2. Make sure the convexity on the adaptor box is at the same side with the slot on the track.
(Figure 2). Fit the adaptor box into the track.
Ensure the convexity on the adaptor box is at the same side with the slot on the track. (Figure 2)
3. Turn the lock switch to the lock position. Turn the circuit selecting handle to 1 or 2 to switch the power on. (Figure 3)
FIXTURE POSITIONING:
1. Power on xture, rotate the luminaire’s body horizontally
or vertically to aim it properly. The xture can
rotate ±90°vertically and 360 °horizontally.
Use the knob on the xture
to lock the xture in desired position.
INSTALLATION INSTRUCTION
LOGOS LEDme® Track Luminaires
H-LED23/40, L-LED23/40, J-LED23/40, WTK-LED23/40, WHK-LED23/40