Installation Sheet
WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. AUGUST, 2014
INSTALLATION INSTRUCTION
Slice - dwelLED™
FM-4109, FM-4111
PREPARATION
1. Shut o the power at the circuit breaker and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts
necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. Connect the transformer input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1)
are secured. If your outlet box has a ground wire (I1) (green or bare copper), connect the xture’s ground wire to it.
Otherwise, connect the xture’s ground wire directly to the mounting plate (D1) using the green screw (E1) provided.
After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
4. Secure mounting plate (D1) to the junction Box (F1) using
junction box screws (B1).The side of the mounting plate
marked “GND” must face out.
5..Connect the xture’s wires (Blue & Red) to the transformer’s (J1)
output wires (Red and Red) – Blue to Red and Red to the other Red.
6. Place the canopy (L1) over the mounting plate (D1) and
secure with screws (C1).
7. Twist lock the glass (G1) into the canopy (L1).
FIG.2
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare Copper
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
FIG.1
F1
J1
D1
E1
C1
G1
L1
B1
K1
I1
A1
Junction Box
Connectors
Ground Wire
Connectors
Junction Box Screw
Blue xture wire
Canopy
Glass
Transformer
Mounting Plate
Transformer output
wires - Red
Red xture wire
Mounting Screw
Green Screw