Installation Sheet

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. DECEMBER 18, 2014 2
WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
PREPARATION
- Shut o the power at the circuit breaker and remove existing xture, including the mounting hardware.
- Carefully unpack your new xture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (FIG. 2)
1. Remove metal nut (H1) from the canopy inside, remove the canopy from the mounting plate. Keep the mounting screws (D1) locked
on the mounting plate (B1).
2. Connect the transformer input wires to supply wires as shown in Fig. 2, making sure that all wire connectors (C1) are secured. If your outlet
box has a green or bare copper ground wire, connect the xture’s ground wire to it. Otherwise, connect the xture’s ground wire directly to
the mounting plate (B1) using the green screw provided. After wires are connected, tuck them carefully inside the junction box.
*Requires transformer to be recessed within the junction box.
MOUNTING THE FIXTURE (FIG. 1)
3. Secure mounting plate (B1) to the junction box using
junction box screws (E1).The side of the mounting plate marked
“GND” must face out.
4. Connect the transformer output wires to the xture wires,
secure with wire connectors(J1).
5. Place the xture’s canopy (G1) over the mounting plate (B1)
through mounting screws (D1) and secure with metal nuts (H1).
6. Put the glass over the canopy (G1) and secure with screws (F1).
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare wire
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
Fig. 2
Fig. 1
Junction Box
Input Wire
Transformer
Output Wire
Wire Connector
P3 Wire Connector
Mounting Plate
Mounting Screw
Junction Box Screw
Fixture
Screw
Canopy
Metal Nut
Glass
Junction Box
J1
B1
C1
D1
E1
F1
G1
H1
INSTALLATION INSTRUCTION
Dice - dweLED™ Vanities
FM-4014