Installation Sheet

WAC Lighting
www.waclighting.com
Phone [phone] • Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone [phone] • Fax [phone]
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone [phone] • Fax [phone]
WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program. AUGUST, 2014
INSTALLATION INSTRUCTION
Dice - dwelLED™
FM-4006
PREPARATION
1. Shut o the power at the circuit breaker
and remove existing xture, including the crossbar.
2. Carefully unpack your new xture and lay out all the parts on a clear area.
Be careful not to lose any small parts necessary for installation.
CONNECTING THE WIRES (Fig. 2)
3. Connect the transformer input wires to junction box wires as shown in Fig. 2, making sure that all wire connectors (A1) are
secured. If your outlet box has a ground wire (I1) (green or bare copper), connect the xture’s ground wire to it. Otherwise,
connect the xture’s ground wire directly to the mounting plate (D1) using the green screw (E1) provided.
After wires are connected, tuck them carefully inside the junction box.
MOUNTING THE FIXTURE (Fig. 1)
4. Secure mounting plate (D1) to the junction Box (F1) using junction box screws (B1).
The side of the mounting plate marked “GND” must face out.
5. Connect the xture’s wires (Blue & Red) to the transformer (J1)
output wires (Red and Red) – Blue to Red and Red to the other Red.
6. Place the canopy (L1) over the mounting plate (D1) and secure
with screws (H1).
7. Put the glass (G1) into the canopy (L1) with allen screw (C1)
use allen wrench (M1).
FIG.2
Fixture Wires
Black or
Smooth
Fixture Wires
White or
Ribbed
Fixture Wires
Bare Copper
(Ground)
House Wires
Black
(Hot)
House Wires
White
(Neutral)
House Wires
Green or Bare Copper
(Ground)
A1
F1
E1
I1
L1
G1
H1
C1
M1
K1
D1
B1
J1
FIG.1
Junction Box
Connectors
Ground wire
Green screw
Blue xture wire
Canopy
Glass
Screw
Allen screw
Allen wrench
Red xture wire
Transformer output wires - Red
Connectors
Mounting plate
Junction box screw
Transformer