Specification Sheet

ELECTRONIC TRANSFORMER CONNECTION BOX MODEL ETB
Ordering Matrix
Model Finish Accessories
ETB BK
See table below
Ordering Example (model) : ETB
Product Details Specification Features
Description:
Enclosure to house transformer. Has separate compartments for
transformer, line and low voltage wiring. Allows the line voltage
connection to be located in a separate compartment.
Catalog Number: ETB = Transformer box for electronic transformers
Compatibility: EN-12100-R-AR
EN-12150-R-AR
EN-24150-R-AR
Knockouts: 6 total. Comprised of the following -
2 on dual compartment side, one for each compartment.
4 (2 on each side) on the short side of transformer side of box.
One full sized and one small knockout.
Materials: Steel enclosure, painted black (BK).
One green grounding wire in primary connection compartment.
Accessories: MTB01 – Terminal Block
Listing: U.L. listed, File Number E204239.
5 year W.A.C. Lighting product warranty.
• One compartment houses the
transformer, another is provided
for line volt wire connections
and the third for secondary
connections. The box has
standard size knock outs for BX
or non-metallic sheathed cable
connectors.
• Has well placed screw holes
that can be used as primary
mounting locations when the
enclosure is going to be
mounted on a vertical surface.
• Complies with electrical codes
requiring transformers to be
housed in enclosures and line
voltage connections in a
separate enclosure.
W.A.C. Lighting reserves the right to modify the design of our products as part of the company’s continuous improvement program.
CATALOG NUMBER
TYPE
PROJECT
ETB is shown here with a 100W
transformer, not included.
1 5/8"
3"
6 1/4"
Sep 2008