Installation Sheet

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
REFLECTOR REPLACEMENT
FIG.3)
FIG.4)
LED REPLACEMENT
1. Loosen the screw and gasket (See FIG.5), remove the panel assembly (See FIG.6).
2. Loosen the LED screws and LED holder , carefully disconnect LED quick connector then replace LED. (See FIG.7).
DRIVER REPLACEMENT
1. Loosen the screw and gasket (See FIG.8), remove the cover assembly (See FIG.9).
2. Loosen the LED driver screws, carefully disconnect LED driver connector from LED connector and replace driver by removing driver
mounting screws. (See FIG.10).
COMPLETING THE INSTALLATION
To prevent moisture from entering the outlet box and causing a short, use clear caulking (i.e. indoor/outdoor silicone sealant) to outline the
Remove clips
screws and gaskets
screws and gaskets
Remove panel
assembly
Remove panel
assembly
LED holder
LED holder
Screws
Connector
LED
FIG.3
FIG.5
FIG.8
FIG.6
FIG.9
FIG.7
FIG.10
FIG.4
INSTALLATION INSTRUCTION
Cube Architectural - LED Wall Mount