Installation Guide

WAC Lighting retains the right to modify the design of our products at any time as part of the company's continuous improvement program.
waclighting.com
Phone [phone]
Fax [phone]
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Avenue
Ontario, CA 91760
INSTALLATION INSTRUCTION
Cube Architectural - Pendant
DC-PD05, DC-PD06
OVERVIEW
It is surface mount down light, included ceiling mount, pendant mount, single direction wall wash and up-down direction wall wash. Check
catalog for various mount type, size, beam angle and color choices.
FIXTURE INSTALLATION
1.
efully not to lose any small parts necessary for installation.
(See FIG.1)
2. Connect all pendant assembly. (See FIG.2) Ther
FIG.3)
3. Pull power supply wires out of junction box through mounting plat
wires are connected securely, tuck them carefully inside the junction box. (See FIG.4)
4. Put the canopy up and rotate clockwise until align the ceiling, then use a screwdriver to tighten the screw. (See FIG.5)
Cast ball, rotate
counterclockwise
Mount Plate
Canopy
Pendant Stem
(Three lengths
to choose)
Secure the screws
Junction Box
Ground Wire
Mount Plate
Canopy
Through wire,
up to plate and
rotate clockwise
Rotate clockwise
until ceiling
CloseOpen
Plate
Nut
FIG.2 FIG.3
FIG.4 FIG.5