Users Manual

3.3.6 Date display format setting.............................................................. 31
3.3.7 network configuration
.......................................................................
32
3.3.8 Display information settings.............................................................33
3.3.9 Opening setting
.................................................................................
34
3.3.10 Fill light setting.................................................................................35
3.3.11 System upgrade
..............................................................................
36
4.Device information................................................................................................. 36
5.contact us.....................................................................................错误！未定义书签。
Instructions for use
1. Thermal imaging temperature measurement is recommended to be
used in indoor environment of 15-30 ℃, avoiding facing high temperature
objects such as windows, air conditioners, radiators and fluorescent
lamps.Outdoor use will be affected by many adverse environment, such
as: sunshine, rain, cold and hot air, snow, cold and heat source objects,
etc;
2. After 5 minutes of power on and operation, the thermal imaging can
enter into a stable state;
3. This product is not a medical device, and its temperature measurement
function is only used to assist rapid body temperature screening. If
people with abnormal body temperature are screened, it is recommended
to use a normal medical temperature measurement device for re
measurement and confirmation.
4. The round hole directly below the screen is an ultrasonic distance
measurement module, with the most accurate temperature measurement
distance of 50cm. When using, please make sure that there is no shelter
within 1.5m in front of the screen. It is forbidden to touch or press with
your hands!