Users Manual

3.1.3 Import face information
This function is applicable to importing face database with U disk when the
terminal is used as a stand-alone version.Note: the U disk must put the face
database exported by the PC management software in advance.
For example
：
Insert the U disk and click "import face information".After the progress bar is
completed, you can unplug the USB stick.It can be seen that the face data in
the face database has been uploaded.
3.1.4 Applicable to gate
This function can be used for the scene where the gate returns the door
opening signal to form attendance record when the supporting gate is used.
Note: this switch does not open if there is no need for the return of the
gate.
In terms of hardware, one pin of the green terminal needs to be connected to
the high-level socket of the gate opening, and two pins need to be connected to
the GND of the gate control board.