link500.1mini 500W RMS Mono Amplifier Owner’s Manual www.wavtech-usa.
WARNING CAUTION This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or property damages. • DO NOT DRIVE WHILE DISTRACTED. WARNING Any function that requires your prolonged attention should not be performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure to do so may result in an accident.
Introduction Welcome to Wāvtech, exceptional mobile audio products for audiophiles. Our products are engineered from the ground up to provide a truly remarkable listening experience with superior performance, sound quality and reliability. Built for the professional installer, our innovative features enable maximum application coverage with ultimate system flexibility.
Top Panel Controls Ž PARAMETRIC EQ CLIP GAIN BOOST WIDTH FREQ SUBSONIC LPF Two input Œ sensitivity ranges are provided for each ‘ ’ “ 5V/ 10V/ channel pair to optimize source volume MIN MAX 0 (dB) 12 NAR WIDE 30 (Hz) 80 10 (Hz) 50 50 (Hz) 500 20V 40V range while minimizing the gain required to achieve full power output for best signal-to-noise.
Power Supply & Output Panel Connections Œ Power Supply Terminal: Ž GND REM +12V MONO Ÿ Ground (GND): The ground terminal must be connected to a metal part of the vehicle with Œ ground plane back to the main battery ground attachment point (a.k.a. chassis ground). This wire should be as short as possible, but no longer than 2ft (60cm), with minimum gauge of 8AWG.
RCA Input Wiring: DETECT LOAD CH1(L) Speaker Level Input Wiring: CH2(R) LOAD PWR DETECT LOAD CH1(L) CH2(R) LOAD PWR PRO CH1(L) CH2(R) PRO RLC CH1(L) RCA IN CH2(R) RLC RCA IN BAL UNBAL BAL UNBAL CH1/2 CH1/2 CH1 (L) CH2 (R) Note: Always connect stereo sources to both CH1(L) and CH2(R) inputs to retain full music content.
Specifications link500.
Warranty & Service Care Wāvtech warrants this product to be free from defects in material and workmanship for a period of one (1) year when purchased from an authorized Wāvtech retailer within the United States. This warranty will be extended to a period of two (2) years when the installation is performed by an authorized Wāvtech retailer. A valid sales receipt is required to verify eligibility of purchase and installation.