Technical data

W&T

Subject to errors and modifications

Local Port

Unless otherwise specified by your network administrator, the

factory default setting Port 49153 can be used.

One reason for changing the factory default local part setting

may be for example a firewall which only allows certain port

accesses.

In any case the set local port on the Web-IO must be

identical with the corresponding settings in the OPC

server.

Client HTTP Port

Specifies the HTTP port on which the control connection to the

OPC server should be opened.

Unless otherwise specified, always use Port 80 here.

Binary Trigger

Here you activate the inputs which should trigger a message to

the OPC server when there is a state change. The hysteresis