Technical data

W&T

Host name or IP address: Must agree with the IP address which

was assigned to the unit. If there is also a DNS name for the

address, you can also use this instead of a number

combination.

HTTP port: Should normally be 80. The port number entered

here is also used for opening the external browser („Web-

Browser“ button“).

Device type: In case of doubt the „Identify“ function can help

to select the proper type here. Some input fields with unneeded

parameters may be deactivated after a selection is made.

Passwort: Here you can enter the Config or the Administrator

password which was specified for the unit.

TCP Port: The factory preset for Port is 49153. For the Web-IO

Analog In/Out check the corresponding setting in the Web

menu of the unit.

OPC Device name: All OPC variables for a device begin with a

common (and unique) name component which you can specify

here.

Adjust timing: The amount of network traffic between the OPC

server and devices depends essentially on the behavior of the

OPC client: The more frequently a client requests updating of

DA items, the more data must be sent over the network.