Technical data

81
W&T
Subject to errors and modifications
The OLE server name which OPC clients will need to specify later
in order to connect to the server is: Wiesemann-Theis.Network-
IO. The OPC server starts automatically upon such requests. To
configure the server you can also run it manually. A
corresponding entry W&T OPC-Server Version 4 can be found
in the Start menu under „Programs.“
3.11.2 Uninstalling
You can remove the OPC server using the control panel
component „Software.“ It is listed there under OPC-Server for
network-I/O devices Version 4.
3.11.3 Configuring
First start the OPC server. For normal installations you will find
the corresponding start icon on your Windows interface under
Start >> Programs >> W&T OPC-Server Version 4.
Click on the Web-IO icon or in the menu on Device >> New I/O
device.
The following window opens: