Technical data

69
W&T
Subject to errors and modifications
In the navigation tree select des Slave: Config >> Device >>
Basic Settings >> Binary1 >> TCP Server and set Application
Mode to Socket Device.
Confirm by clicking on the Temporary Storage button.
In the navigation tree select Config >> Ports >> Port X >> Out-
put Mode and set the outputs which are no longer to operate
Box-to-Box to HTTP.
Confirm by clicking on the Temporary Storage button. Now the
changed settings still need to be activated. Use the Logout
button or select Config >> Session Control >> LogOut.
After clicking on the Save button all the settings are updated in
the Web-IO and the start page is reopened in the default user
mode.
3.9.5 Quitting Box-to-Box mode only for the Slave Web-IO
If the Master is no longer available, for example because there
is no network connection but you still want to deactivate Box-
to-Box mode for the Slave, in the navigation tree select
Config >> Session Control >> LogOut.
The configuration frame contains an addition button called
Stop Box2Box Slave.
If this button is not displayed, first click on the Reset button.
The Web-IO is restarted.