Technical data

W&T

Here you are shown in which mode the individual inputs are

currently working. In addition the current status of a Box-to-

Box connection is displayed in the footer of the Web page.

3.9.4 Quitting Box-to-Box mode

Box-to-Box mode only for the Master

m Necessary access rights: Administrator

Quitting Box-to-Box mode should always be done by

configuring the Master correspondingly. Master and Slave Web-

IO must be connected in the network. In the navigation tree

select des Masters: Config >> Device >> Basic Settings >>

Binary1 >> TCP Client and delete the entry for Server IP Addr.

Also set Application Mode to Socket Client.

Confirm by clicking on the Temporary Storage button.

Then set under Config >> Device >> Basic Settings >> Binary1

the Operation Mode to TCP Server.

Confirm by clicking on the Temporary Storage button.

Now in the navigation tree for the Master select: Config >> Ports

>> Port X >> Output Mode and set the outputs you want to

operate Box-to-Box to HTTP.

Confirm by clicking on the Temporary Storage button. Now the

changed settings still need to be activated. Use the Logout

button or select Config >> Session Control >> LogOut.

After clicking on the Save button all the settings are updated in

the Web-IO and the start page is reopened in the default user

mode.

Quitting Box-to-Box mode for the Slave Web-IO

m Necessary access rights: Administrator