Technical data

W&T

Subject to errors and modifications

Activate here the outputs which are to be set by the

corresponding inputs on the Slave for Binary 1 and confirm by

clicking on the Temporary Storage button.

In contrast to the inputs, the outputs activated for Box-to-Box

mode are no longer accessible for other modes.

Now the new settings still need to be activated. Use the Logout

button or select Config >> Session Control >> LogOut.

After clicking on the Save button all the settings are updated in

the Web-IO and the start page is reopened in the default user

mode. The Master Web-IO attempts then to open a connection

to the Slaqve Web-IO. All functions described here for Binary 1

can of course also be used under Binary 2. For example a Web-

IO A in the Binary 1 area can be configured so that Input 1

operates Box to Box with a Web-IO B. In the Binary 2 area Input

2 can then be configured so that it works together Box-to-Box

with another Web-IO.

3.9.3 Determining Box-to-Box connection status

m Necessary access rights: Administrator

The connection status of a Box-to-Box connection can be

queried using the navigation tree under Diag >> Test >> Out-

put Config.