Technical data

50
W&T
After you have made all your settings, send them by clicking
on the Logout button. Clicking on the Save button activates the
settings.
3.8.4 The Web-IO as UDP-Peer
To use the Web-IO as a UDP peer a few additional settings must
be made.
In the navigation tree select Config >> Device >> Basic Settings
>> Binary 1>> UDP Peer
m Necessary access rights: Administrator
Local Port
The local port on the device is factory set to 45889. If your
application requires a different local port for the Web-IO, enter
the desired port number in the Local Port field.