Technical data

W&T

Subject to errors and modifications

Please note that for connections using fee-based dial-

up connections too small an interval may result in the

connection not being closed, in turn resulting in permanent

fees!

Mode

Select here:

. Socket device - If you want access to the Web-IO password

protected.

. Compatible 50xxx - If you want access to the Web-IO using

applications which were programmed fo the older Digital IO

Com-Servers. You can also use this mode for new

applications that do not require password protection.

More detailed information about Box2Box Master mode can be

found in the Box-to-Box section.

After all your settings have been made, send them to the Web-

IO by clicking on the Temporary Storage button.

In addition you must enable the used outputs for Binary mode.

Now in the navigation tree select Config >> Ports >> Port X >>

Output Mode and highlight the desired Binary access.

m Necessary access rights: Administrator