Technical data

45
W&T
Subject to errors and modifications
In the navigation tree select Config >> Device >> Basic Settings
>> Binary 1>> TCP Server.
m Necessary access rights: Administrator
Local Port
The local port on the device is factory set to 49153. If your
application requires a different local port for the Web-IO, enter
the desired port number in the Local Port field.
Client HTTP Port
Is only relevant for OPC and Box2Box modes and specifies the
HTTP port on which a control line should open a connection to
the OPC server or slave box.
Unless otherwise specified, Port 80 should always be used here.
Binary Trigger
Enter here a hysteresis value for both ports which, when it is
reached or exceeded, should trigger sending of data to the
client application (important for event-triggered applications).