Technical data

W&T

In the navigation tree select Config >> Device >> Basic Settings

>> Binary 1 if you want to configure the operation mode for

access through Binary 1.

m Necessary access rights: Administrator

After selecting the desired mode and setting Enable Binary

send the setting to the Web-IO Analog-In/Out by clicking on

the Temporary Storage button.

For access from your own application programs the developer

is provided with two levels of the socket programming.

1. Socket Device (password protected access)

2. Compatible 50xxx (This mode is compatible with the binary

structure which was alrelady used by the older W&T Digital

I/O Com-Servers.)

Both access options use the same binary structures and differ

only in the absence of password protection in Compatible

50xxx mode.

3.8.2 The Web-IO Analog-In/Out as Socket-Server

To operate the Web-IO Analog-In/Out as a socket server, a few

additional settings must be made.