Technical data

4
W&T
Content
Introduction ............................................................................................ 3
1 Quick-start, Commissioning ......................................................... 7
1.1 Connect to power ........................................................... 7
1.2 Wiring the in- and outputs ............................................... 9
1.3 Network connection ...................................................... 11
1.4 Assigning the IP address using „WuTility“ ....................... 12
1.5 Assigning the IP address using DHCP protocol ................ 14
1.5.1 Enabling/Disabling DHCP ............................................. 15
1.5.2 System Name ............................................................... 16
1.5.3 Lease Time .................................................................. 16
1.5.4 Reserved IP addresses .................................................. 17
1.5.5 Dynamic IP addresses .................................................. 17
1.6 Start page ..................................................................... 18
1.7 Assigning the basic network parameters ......................... 19
1.8 Smartphone Page .......................................................... 23
2 Graphical Representation of the Measurements ..................24
2.1 Basic functions ............................................................. 24
2.2 Config Menue ............................................................... 26
2.3 Table ............................................................................ 28
3 Other Basic Settings .......................................................................29
3.1 Configuring the port and device name ............................ 29
3.1.1 Text .................................................................. 29
3.1.2 Ports ................................................................. 30
3.1.3 Port Config ....................................................... 32
3.2 Calibration ................................................................... 33
3.3 Specifying Output Mode ................................................ 34
3.4 Compensation of the output controller (57662 only) ....... 36
3.5 HTTP - Controlling outputs in the browser (Control) ....... 38
3.6 Basic Settings HTTP ....................................................... 39
3.7 Basic Settings UDP ........................................................ 41
3.8 BINARY - Socket programs with binary structures ............ 42
3.8.1 Specifying the operating mode .......................... 43
3.8.2 The Web-IO Analog-In/Out as Socket-Server ...... 44
3.8.3 The Web-IO as Socket-Client .............................. 47
3.8.4 The Web-IO as UDP-Peer .................................... 50