Technical data

39
W&T
Subject to errors and modifications
The Follow slider checkbox causes the selected output value to
be set as soon as the slide controller is released at a certain
point. At the same time the slide controller automatically
changes its position when the device changes its output value,
for example using TCP commands.
If the Follow slider checkbox is not selected, an input field and
a button appear which can be used to manually set the output.
The value in the input field can also be set using the slide
controller. The entered output value is set as soon as the Set
button is clicked.
!
Please note that control scaling has only limited function:
0..10 (#57662) or 0..20 (#57661) in configured scaling.
3.6 Basic Settings HTTP