Technical data

36
W&T
3.4 Compensation of the output controller (57662 only)
During the use of applications, which have a high entrance
capacity, it is necessary to compensate the voltage regulator
to prevent an overshooting of the output value.
Example: Output regulation with entrance capacity of 100µF,
without compensation:
This overshooting can be avoided with a compensation value
between 0 and 1000. This value can be configured manually,
or determined automatically. The device adjusts two test pulses
with 80% amplitude at the output.
To start the automatic determination of the compensation click
on the button „send test pulses“.
1
Please make sure that no sensitive devices are attached
to the output to avoid inadvertent output levels.