Technical data

146
W&T
describes a background color (BGColor) which depends on the
alarm status of the first port. If there is a limit violation, this
color is red. Otherwise the tag does not describe an explicit
color. This tag is required for example to show limit violations
in the log table in red.
<w&t_tag=bc2>
Background color for the second port.
<w&t_tags=sensorx>
<w&t_tags=outputx>
inserts the name of the sensor or output into the page and
contains a link to the complete sensor description.
<w&t_tags=device_name>
inserts the assigned device name.
<w&t_tags=device_text>
inserts a freely configurable, descriptive text for the device.
<w&t_tags=location>
<w&t_tags=contact>
inserts the respective text modules which are configured under
Config >> Device >> Text.
<w&t_tags=reload_button>
insers a „Reload“ button for refreshing the current page.
<w&t_tags=previous_button>
<w&t_tags=next_button>
inserts a button for paging ahead or back through the table.
!
The „Previous“ button and the „Next“ button only have
any function in the „Log.htm“ file.
<w&t_tags=logtable>
inserts a table with the current measurement values. On the
„log-page“ you can only navigate forward and backward in this
table using the „Next“ and „Previous“ buttons (see above). On