Technical data

145
W&T
Subject to errors and modifications
can be inserted into the page using „tags“. In the following you
will find an example for creating the page „user.htm“.
Create an HTMP file which must begin with the expression
<user.htm> (resp. log.htm or home.htm)
Then enter the HTML code.
You have the ability to show the following parameters on your
pages:
<w&t_tags=m1>
shows the current measured value of the first port.
<w&t_tags=m2>
shows the current measured value of the second port.
<w&t_tags=time>
inserts the current time.
<w&t_tags=steps>
inserts a list box for selecting the time steps you want to
display.
<w&t_tags=ok_button>
inserts an „OK“ button which sends the selected parameters to
the device.
<w&t_tags=session>
inserts an invisible session control so that the user can leave
the page without being logged out by the device. The
expression is only needed if you want to design your own
button for sending. Insert this expression then between <form
action> and </form>.
Background color:
You can assign different background colors to values shown in
tables depending on the sensor state:
<w&t_tag=bc1>