Technical data

131
W&T
Subject to errors and modifications
If this box is checked the device sends its IP address in front in
the reply along with the system name and sensor name. If the
box is unchecked only the actual measurement values are sent.
The expression for polling the respective port is:
GET /SingleX
X: Number of the Inputs: 1=Port 1, 2= Port 2
Example, Display with option GET Header enable:
10.40.42.44;WEBIO-046EE9;Sensor 1 0-20mA;14,300 mA
Example, Display without option GET Header enable:
14,300 mA
When entering the command string
GET /Single
without a port number the device outputs the values for both
ports separated by semicolons:
10.40.42.44;WEBIO-046EE9;12,000 mA;5,000 mA
bzw.
12,000 mA;5,000 mA