Technical data

128
W&T
!
Please note, especially for mass updates/configurations,
that the IP address stored in the XML file is also sent and
must then be changed accordingly.
!
Please note when using the active input that in Output
Mode “Output OFF” causes passive input mode to be set.
This must then be manually reset to active input mode
after the upload. This protects the hardware from inadvertent
damage.
In addition, the user pages (user.htm, home.htm, log.htm) can
also be replaced in the Upload area.
An example can be found in the Appendix (example for
creating your own Web pages).
Use the menu item „Upload -> GIF“ to replace the logo shown
in the menu and store it directly in the device.