Technical data

120
W&T
3.20.2 Alarm X -> FTP
FTP Local Data Port: This is the local data port on the Web-IO.
Valid are entries between 1 and 65536. Entering „AUTO“ causes
the device to select the port dynamically.
File Name: Enter here the path to the file you want the device
to access.
FTP Alarm Text: Specify the text for the FTP contents. The
following tags are accepted in these text boxes. The device
replaces these tags with the respective values:
Function
comma spelling
(##,####)
dot spelling (##.####)
<M1> <m1>
Measurand 1: Displays the
value for channel 1.
<M2> <m2>
Measurand 2: Displays the
value for channel 2.
<AA>
Alarm active: Shows all alarms
(numbers, komma separatet)
which are currently active.
<AN>
Alarm sensor number:Shows
all sensors (numbers, komma
separated) which match with
the configured alarm values
per alarm.
<AS>
Alarm sensor name: see
above, but with sensor names
(komma separated)
Displays the actual time and
date as a strin
g
.
Year (####): Displays the
y
ear.
Month (##): Displays the
month.
Da
y
(##): Dis
p
la
y
s the da
y
.
Hour (##): Dis
p
la
y
s the hour.
Minute (##): Displays the
minute.
Second (##): Displays the
second.
W&T tag value
<Z>
W&T tag date + time
<$y>
<$m>
<$d>
<$h>
<$i>
<$s>
If you want a line feed after each data transmission, enter a
CRLF by pressing the RETURN key at the end of each line.
Alarm Clear Text: This message is sent at the end of the alarm
state. The above listed tags apply here as well.
Options: